Q:1. Can this be used on a split front seat?
2. Is this easily installed after the person is seated and removable before standing?
Asked by: Becky
- 8/3/2015
A: The Splash Guard simply slips over and rests on the end of the toilet. Whether it is on the seat or the bowl of the toilet really doesn't matter; although the bowl is usually not as wide as the seat is which might make the guard not fit as securely. It is easily installed and removed as needed.
Was this answer helpful?
7 of 13 Customer(s) found this Answer helpful.
Q:Can this item be placed once the patient has sat down, or do you have to have it in place? I need something that is easily removed and again installed.
Asked by: Peg
- 3/6/2017
A: Yes. It is designed to slide over the front of the seat rim and can be easily installed and removed as needed.
Was this answer helpful?
4 of 6 Customer(s) found this Answer helpful.
Q:Do you make these a little narrower and a little shorter so they do not dig into hypersensitive person's leg or belly? Or is there a soft edging that can be applied to help eliminate friction on the sides that is easy to clean? Thank you.
Asked by: momofmany
- 7/7/2018
A: Currently the Maddak MaddaGuard Splash Guard only comes in one size. Because the product is plastic you may be able to get an adhesive cushion to put on the outer edge. Most foam cushion can be cleaned with soap and water.
Was this answer helpful?
1 of 3 Customer(s) found this Answer helpful.
A: It should work with a portable potty as long as the seat is at least 4 inches wide. The Maddak MaddaGuard Splash Guard sits on top of the toilet seat and can be removed when not in use if desired.
Was this answer helpful?
1 of 3 Customer(s) found this Answer helpful.
Q:Will this fit on a toilet seat with that has the gap in the front of the seat?
Asked by: Denise
- 9/15/2020
A: The Maddak MaddGuard Splash Guard can be use on some toilets that have the gap in the front of the seat. You may determine if this product can fit securely by checking the size of the gap and the with of the toilet seat. The size of the Splash Guard is 3.85" long (check and see if it will be longer than your toilet gap) and 2.65" wide (Check and see if this can be place around your toilet rim).
Was this answer helpful?
0 of 1 Customer(s) found this Answer helpful.