Home > Getting Ready > Grab Bars > No Drill Stainless Steel Peened Grab Bars

12% off

CIP200 No Drill Stainless Steel Peened Grab Bar

No Drill Stainless Steel Peened Grab Bars

22 Review(s)

Questions about this item? Ask here.

(See 31 Questions)

Patented mounting system does not require drilling holes.

Your Price: $69.95

Retail Price:$79.45

Your Savings:$9.50(12%)

In Stock

Current Inventory: 48 items

Part Number:CIP200

Manufacturer:Innovative Product Sales International

Patented mounting technology works on tile, ceramic, marble, granite, stone, glass, brick, metal
Textured finish center for secure grip
Easy to install, no drilling required, patented adapter and adhesive

Choose Size:

Quantity

The No Drill Stainless Steel Peened Grab Bars are easy to install and do not require drilling. The unique installation system "nie wieder bohren" ("no drilling required" in German) alternative attachment technology secures these peened grab bars to a wide variety of surfaces such as tile, ceramic, marble, granite, stone, glass, brick, metal.

The No Drill Stainless Steel Peened Grab Bars are heavy duty 18 gauge stainless steel grab bars that are ADA approved for fall prevention and balance assistance. The patented mounting adapter and adhesive create an extremely durable seal to secure the bars to smooth, non-porous surfaces. Using he unique mounting system, the grab bar can be placed exactly where needed and at whatever angle is required to accommodate the user. These super sturdy grab bars with versatile installation technology can be used as permanent fixtures, able to hold an exceptional amount of weight for a lifetime without shearing or failing. If necessary, this advanced adhesive material can be easily removed and is guaranteed to leave no permanent marks. Please note: adhesive will not bond to plastered, wall-papered, veneered, or painted surfaces.

PDF

Drill Free Peened Grab Bars Product Instructions

No Drill Stainless Steel Peened Grab Bars Specifications:

Finish: Polished stainless steel with textured center grip.
Available Lengths: 12, 18, 24, 30, 36, and 42 inches.
Diameter: 1.5 inches.
Material: 18 gauge 304 grade stainless steel.
Note: Adhesive will not bond to plastered, wall-papered, veneered, or painted surfaces.
Weight limit: 250 pounds.
Other colors available: Brushed stainless, Bright white, Atlas bronze textured, Black bronze, Brass flair.

View All Reviews

No-Drill Shower Grab Bar Does the Job

Easy to install and it does the job. Honestly, I wasn't looking for something that would support my whole weight (160 lbs), just something I could hold onto when I was showering or stepping in or out to the shower. This fits the bill. In fact I ordered two and I'm about to order another one form my other shower.

Did you find this helpful? 39 of 42 Found Helpful

Reviewed by: Ace Toscano from Hudson, FL. on 11/21/2014

Daughter in law

This item worked very well for my 83 y.o. father in law who has fallen in the tub and weighs approx 230 lbs.

Did you find this helpful? 30 of 32 Found Helpful

Reviewed by: Tamie Ryan from Scott Depot, WV. on 3/3/2016

nice quality

Installed these for my grandfather to help stabilize when getting in and out of the shower, he has to step over the tub wall. Have been installed for a year with no issues. We didn't want to risk drilling through the tile so we went with these. Installation was easy and quick; just make sure to clean the surface well so the epoxy can make a good bond.

Did you find this helpful? 30 of 31 Found Helpful

Reviewed by: Banks from MS. on 9/10/2015

Retired

I Waited two weeks before writing this review. I installed the Grab bar as per the instructions it was very easy and clean. We waited 24 hours before getting the bar wet, so far it is holding just as promised. It is very strong and looks great. My wife is very pleased and has urge me to buy 2 more for other bathrooms in our home. Great product great company. Thank you, Lou

Did you find this helpful? 26 of 28 Found Helpful

Reviewed by: Louis from New Jersey. on 3/15/2016

in your video, no washers were shown, mind came, with washers. allen key, not the best. other than that great product.

Did you find this helpful? 15 of 16 Found Helpful

Reviewed by: WALTER GRABEKLIS from NEW YORK. on 1/31/2016

There are no reviews for this product!

View all Q&A

Q: Will the unit affix firmly to tile if a grout line is under one of the mounting flanges?

Asked by: joe - 10/30/2016

A: Surface must be flat on plane to avoid continuous surface tension on the adhesive.

If placed on the grout line the surface tension may be interrupted causing failure to adhere completely.

Was this answer helpful? 9 of 9 Customer(s) found this Answer helpful.

Answer provided by: Andy (10/30/2016)

Submit an answer

Q: If your grab bars are installed as per instruction, how much weight can they handle?

Asked by: ned - 11/6/2016

A: When installed properly the weight capacity of the bonding agent is 250 pounds. However, this greatly depends on the weight capacity of the material the bars are being mounted too.

Was this answer helpful? 8 of 9 Customer(s) found this Answer helpful.

Answer provided by: Banks (11/6/2016)

Submit an answer

Q: Where can I purchase the no drill fastener system withou buying the grab bar?

Asked by: Dan - 9/29/2016

A: Mounting kits are available. The item number for the kit is CIP200MK; you will need to give us a call to order one as they are not listed online.

Was this answer helpful? 6 of 6 Customer(s) found this Answer helpful.

Answer provided by: Banks (9/29/2016)

Submit an answer

Q: I need to relocate my grab bar. Can I purchase just the installation kit?

Asked by: Stanley - 10/4/2017

A: Yes, replacement mounting kits are available. The item number for the kit is CIP200MK; you will need to give us a call to order one as they are not listed online.

Was this answer helpful? 6 of 7 Customer(s) found this Answer helpful.

Answer provided by: Banks (10/4/2017)

Submit an answer

Q: will this work on porous surfaces ?

Asked by: judith vargas - 9/8/2016

A: Yes, porus surfaces are preferable as they give the bonding agent more surface area to adhere to.

Was this answer helpful? 3 of 3 Customer(s) found this Answer helpful.

Answer provided by: Banks (9/8/2016)

Submit an answer

Q: Are the Peened Grab Bars all 1.5 inches thick? Are they available at 1.25 inches, my preference? Do offer some of the other NoDrill products: other grab bars at 1.25 inches?

Asked by: peter - 11/19/2016

A: The No Drill Stainless Steel Peened Grab Bar is only available in the 1.5 diameter. The Invisia line of grab bars are all 1.25 diameter with 500 lb weight capacity, however, they are required to be drilled into the supporting structure of the walls.

Was this answer helpful? 2 of 2 Customer(s) found this Answer helpful.

Answer provided by: Andy (11/19/2016)

Submit an answer

Q: how much weight will the no drill bar hold?

Asked by: rob - 1/17/2018

A: It will hold 250 Pounds

Was this answer helpful? 2 of 2 Customer(s) found this Answer helpful.

Answer provided by: Deb Florea (3/13/2018)

Submit an answer

Q: Will this grab bar work on a aqua glass acrylic shower stall?

Asked by: August Beres - 8/15/2016

A: Yes, as long as the surface is smooth and flat the No Drill Stainless Steel Peened Grab Bar should work.